| Pressure: | Up to 60 psi, 4.1 bar
Up to 75 psi, 5.1 bar for 48 hours |
| Temperature: | 34°F to 104°F (1°C to 40°C) |
| Sterilization: | Gamma Standard (blue) and PPSU (purple) Version: Up to 50kGy irradiation AutoClave (white, High Temp(HT) Version): One Cycle up to 266°F (130°C) for 60 minutes |
| Termination Size: | 1/4", 3/8”, 1/2", 3/4" ID hose barb (6.4mm,
9.5mm, 12.7mm, 19.0mm) and 3/4", 1-1/2" sanitary |
| |
| Materials: |
| Main Components: | Polycarbonate (white), USP Class VI, ADCF (standard and HT versions)
Polyphenylsulfone - PPSU, USP Class VI, ADCF (AQG PPSU version) |
Pull Tabs/Caps: | Polycarbonate (blue, standard version),
USP Class VI, ADCF
Polycarbonate (white, HT version),
USP Class VI, ADCF
Polycarbonate (purple, PPSU version),
USP Class VI, ADCF |
| Seals: | Silicone (clear), platinum-cured,
USP Class VI, ADCF |
| Membrane: | Polyethylene (standard version, PPSU version),
USP Class VI, ADCF
Hydrophobic polyethersulfone with PTFE strip (HT version),
USP Class VI |
| | |
| | |
 |
| | |
| This graph is intended to give you a general idea of the performance capabilities of each product line. The shaded area of the graph represents the operating range of the product family, i.e. upper and lower values are shown. Therefore, depending on the exact coupling configurations selected, you can reasonably expect values to fall within the shaded area. |
| | | |